Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
jt24

Aluminum drop down trailer for fish house...

4 posts in this topic

I had wondered about that to. I looked at alot of different trailers and found none that were aluminum. The next house i build will have a aluminum frame. Will most likely be more expensive but if i can weld it my self it will save some cash.

Share this post


Link to post
Share on other sites

Does anyone make such a beast?? I'm thinking of building a house and it seems aluminum is the way to go in trailers these days...

Share this post


Link to post
Share on other sites

My father-in-law in ND said a guy up there is making them. I'm going to check into that over the off season. I think that is the way to go - no rust and lighter weight. I'll let you know if I find anything out - might be a while before I make it back out there to have a look.

Share this post


Link to post
Share on other sites

In addition to additional cost when building, I'd check into the oxidation of aluminum; and consider the drawbacks of possibly earlier age weakening of aluminum versus steel.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • What does everyone use? decoy string mono braid thanks.
    • LOL!  The truth of the matter is, CWD is widespread across the country and I believe in only one state, somewhere out west, has it caused population level decreases.  The DNR has no choice but to try their darnedest to eliminate it.  If they don't and it becomes widespread, they will be ridiculed to no end.  If they try to fight it, they will still be ridiculed when they fail to eliminate it, but at least they tried.  IMVHO, it is here, just like the invasive species continuing to spread in our lakes.  There is no way to eliminate it.  But as I stated, it won't significantly impact deer numbers in the state.  The disease will kill far fewer deer than the efforts to get rid of it will.  It is mainly the health issues to worry about.  But I've been wrong once or twice before.
    • Was Hillarys plan to help rural America much like Obama's and Rick Nolan's? Wait for an industry to collapse then push for tarriffs a year after the fact and claim victory?
    • Kinda like how Trump is the grand wizard of the klan because he hasn't  denounced every supporter he's had well enough.
    • Regardless of where you put that fan you'll still need another fan of some sort to circulate the air around the house. The heater one only get the air out and off the heat exchange. Put one or two more in the upper corners blowing the air back down. Hugger style ceiling fans if you have room are the best. The blades need at bare minimum 4 inches and most experts say 8 inches of clearance to the ceiling. I'm at about 4 1/2 and it works fine. 
    • Keep in mind its technically winter and by foaming it in "his" shop he is doing a service to you and you are paying for it.  Your house will need to be at least 50 degrees to foam it.  I just had my 8x16 floor sprayed in my shop this past sat and it was $220.  The guys that did mine are done for the season, getting too cold to travel and keep the chemicals from freezing. 
    • An easier thing first is to get the thermostat bulb out of the cabinet of the heater, it will react faster to the temp you feel, not the retained heat in the unit.
    • I'm starting to wonder about my wife, she bought me a suit lined with lead. Now she's trying to convince me it's for the xrays in the sun.?.
    • Here is the p/n of the screws I used from Fastenal.  #0148433  #10 flat head self drilling screw x1-1/4" long.  I'm sure Northern States supply or other places can match them up as well, I have an account and paid about $0.09 each.  Pre drill the wood so it doesn't crack.  I installed with an impact driver.  Try and keep your fir strips straight and at nominal dimensions it sure helps with the second layer of installation.  For reference I used about 350 screws to fir a 8x16 Yetti.
  • Our Sponsors