Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
Guest

New Electronics for new boat

2 posts in this topic

I'm requesting you regarding electronics on a new boat. I am in the process of buying a 19' Lowe Tahiti Deck Boat with a 150 Ficht for a family/fishing boat and I want to get the right electronics for fishing. I really like sonar and mapping with GPS and I'm looking at the: Lowrance 2001 Model LCX-15CT with TFT (Is this too much?)
with the mapping package. I like computers and would enjoy the interface. Having it set to be moveably mounted at the bow or console.

I like to walleye/northern/bass fish on Mille Lacs, Lake of the Woods, and Vermillion etc, and I really need mapping. I get lost easier as I get older, and of course, forget stuff like good spots.
Do you think I'm making a good choice?

Also, do you like the Minn Kota Minn Kota 2001 Genisis 74/AP with Auto Pilot for a bow mounted electric motor?

And one more thing, do you like the :
Minn Kota 2001Deckhand Model DH-35
with Crabclaw CC-18 Anchor & 60 ft of 800# Nylon Rope
I have a bad back? I would get one on the front and one on the back.

Rob, any help is greatly appreciated on this.

Regards,

Al

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    •  I use a Digger mount on my ATV and sled.  Its fast and easy.   I'm on the ice everyday testing and tweaking Nils blades. I rack the auger on every blade change and some days that could be 20 times so for the me the Digger is exactly what I need.  The clamp on the Digger makes fast work of securing the auger and removal.   The height of the Digger frees room on the rack for more gear.      Once in a while we'll take my buddies ATV out fishing.  Hes got no auger rack so we'll bungie the auger to the ATV rack. It works but it makes me appreciate the Digger rack all the more.   Any rack would be an improvement there.   In the past guys have posted their homemade racks and I hope they do so again.   
    • Currently have a couple empires. Most likely toss one of them in. If I go with a furnace I'll use a small plug in step down transformer 120v AC to 12DC. They are cheap as hell basically an oversized cellphone charger.
    •   You realize the only ones taking Calexit with any seriousness are conservatives. Which means conservatives are the ones falling for the Russian propaganda. Liberals say it sarcastically because conservatives think the country would be better off without the "coastal liberal elites" (even though California pays in $405 billion in federal taxes and receives only $344 billion in federal spending, meaning the rest of the country would be $61 billion poorer without California).
    •   As in the one that lets me use his cabin for Turkey and Deer hunting!
    • So Bear, please describe what your policy on those drugs now banned would be, in as much detail as you can.     I am really wondering what the alternative envisioned by the "stop the war on drugs" folks is.      
    •   Bear, I explained why we are stuck with the two party system.   If you don't like the two we have, you need to "pull a trump" and take over one of them.     Good Luck. 
    • Actually only one species of bumblebee so far.     I have no idea how one distinguishes the species of bumblebees.   
    • If this is your carb # 6 is the drain screw   http://www.marineengine.com/parts/yamaha-outboard-parts/1997/30/30ELHV/620301630004
    • I would suggest using non-oxy gas also!
    • I highly doubt it needs carb kits if only sat that long. Draining the carb bowls and spraying carb cleaner in there can clean things up a lot and loosen sticky floats. Should be a main jet on each carb you can pull to drain carb bowls and spray into and clean jet. Put in fresh gas with seafoam in it and new plugs and it will probably run. Impeller is a pretty easy job to. Should be able to find a video on u tube on how to do it. I would drain my carb bowls on my old 115 2 stroke every spring and you would be surprised at the slimy stuff that came out of them sometimes and that was just sitting over winter.
  • Our Sponsors