fishbreath Posted February 10, 2003 Share Posted February 10, 2003 How do I get the blue lube into the tube? Water gets inside and they they don't turn easy. I want to repack them. Thanks. Link to comment Share on other sites More sharing options...
0 iffwalleyes Posted February 11, 2003 Share Posted February 11, 2003 To get the blue lube inside you have to take the first pull the red rubber cap off of the top and then unscrew the small nut off of the top then the spring and then unscrew the cross piece that hold the flag when it is set. Then the spool and the rod it is attached to should just slide out the bottom. Put the lube in the tube and then put some on the rod attached to the spool and put it back together and your done. Link to comment Share on other sites More sharing options...
0 hunt4food Posted February 12, 2003 Share Posted February 12, 2003 iffwalleyes said it well. the only thing I would add is to use a coat hanger and some gun cleaning patches and clean out the old grease and possibly moisture first. then reassemble them. Make sure you use lots of Blu-Lube. I usually squirt a bunch of it in the tube from the bottom before inserting the rod and spool back in. Then, I "twist" the spool as I put it back in. Link to comment Share on other sites More sharing options...
Question
fishbreath
How do I get the blue lube into the tube?
Water gets inside and they they don't turn easy. I want to repack them. Thanks.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts