Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
rcthd

kerosine heater for house

3 posts in this topic

Can I use a kerosine heater to heat my portable? I have one just sitting around that I could use if there isn't any issues with using it.
Thanks
Rick

Share this post


Link to post
Share on other sites

Years ago when I got a portable house we used a kerosene heater. Like any other heater it will eat up the oxygen. I would think you'ld be OK as long as you allow for enough fresh air and ventilation. After a while of using one with the house zipped up tight I tried to light a lighter and only the top of the flame appeared but outside the door the whole thing worked. I guess we were filling up on carbon monoxide. A lesson was learned that day.

Share this post


Link to post
Share on other sites

One half hour after the lighter lights like that you will take the long nap, BE CAREFULL.
Personally I never liked the smell or mess of Karo but that's just me.

------------------
Have a good one!
CWMN

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • The resharpening doesn't kill my vibe towards the K-drill over the Nils. Babying things aren't part of the average consumers mindset. Durability is what they want.    I'm still on the hunt for an electric version that will suit my newly adapted way of fishing. If I can drill 20 holes in a day I'll be as happy as a fat kid at a cake eating contest. 
    • Oh go back to the Hey eyeguy BBQ post and bug BigDave!
    • Because your usual response is to demand whether I support this of that from some politician or what you claim is "my party", to try to deflect and obfuscicate.   Nobody can make you do anything here, but if you are prescribing policy it seems like you should be able to defend it with facts.
    • You must buy it.... I know you don't catch them!!!
    • I'll have to wait till I find a fresh road kill!! A plug your pie hole ding dong!
    • Hey don't get me involved in your frivolous hokus pokus!
    • Fun fact, CO alarms actually won't go off until 70 ppm is reach over 60 minutes. I believe this stems from Chicago FD responding to too many false CO calls. Law was passed to increase the level of exposure to lower emergency calls. Sofia's law is challenging this on boats and trying to mandate low level CO detectors be installed...I believe the incident happened at much less.That said MN is the first state to require CO detectors on boats with cabins.   Get a CO detector that displays an actual reading or better yet, find a low level CO monitor.   CO has a half life of around 4 hours...meaning if u get exposed with a level of say 20, going outside a few minutes won't help much espically if you go back into your infected fishouse....after 4 hrs of fresh air you'll be down to 10...hence the importance of the CO monitor and not just thinking going outside once an hour is doing much good if u have a leak.   That story made headlines but there was another bad CO incident that happened that same week regarding an ice fisherman...who also did not have a CO detector.
    • Nils extensions go on the bottom of the auger and have the helical.  You remove the blade and put the extension on.  They are made for all models of Nils.   Yes of coarse I've used a Milwaukee Fuel with an 8" Nils and posted video.  Less torque, faster,  but most importantly better battery life using the Nils.   . Yes they weigh a pound or two more then the KDrill because they aren't made from plastic.    If this comes down to blades well let's go there then. Kdrill has free sharpening but takes 3 weeks.   Did you know the material taken off that type blade and mount means less bite and therefore can never cut like new.  That is also why it is up to thier discretion if your blade can be sharpened.   A Nils head is blade and mount and can be adjusted after sharpening to cut as new.   So a nick that would ruin the KDrill blades can be removed from the Nils and still cut like it was intended to. I recently repaired a Nils blade that was used to dig post holes. My point is a Nils should serve its owner for a very long time. In 10 years I've dulled one Nils blade and that was from drilling into some buried trash left on the ice.      
  • Our Sponsors