Fluid forum view allows members only to get right to the meat of this community; the topics. You can toggle between your preferred forum view just below to the left on the main forum entrance. You will see three icons. Try them out and see what you prefer.
Fluid view allows you, if you are a signed up member, to see the newest topic posts in either all forums (select none or all) or in just your favorite forums (select the ones you want to see when you come to Fishing Minnesota). It keeps and in real time with respect to Topic posts and lets YOU SELECT YOUR FAVORITE FORUMS. It can make things fun and easy. This is especially true for less experienced visitors raised on social media. If you, as a members want more specific topics, you can even select a single forum to view.
Let us take a look at fluid view in action. We will then break it down and explain how it works in more detail.
The video shows the topic list and the forum filter box. As you can see, it is easy to change the topic list by changing the selected forums. This view replaces the traditional list of categories and forums.
Of course, members only can change the view to better suit your way of browsing.
You will notice a “grid” option. We have moved the grid forum theme setting into the main forum settings. This makes it an option for members only to choose.
This screenshot also shows the removal of the forum breadcrumb in fluid view mode. Fluid view remembers your last forum selection so you don’t lose your place when you go back to the listing.
The benefit of this feature is easy to see. It removes a potential barrier of entry for members only. It puts the spotlight on topics themselves, and not the hierarchical forum structure. You as a member will enjoy viewing many forums at once and switching between them without leaving the page.
We hope that fluid view, the new functionality is an asset that you enjoy .
From the picture it is a male yellow headed blackbird; IMO there is even a faint white bar on the wings which may be what you describe as "the ring on its back" and the black smudge under and behind the eye. I can't tell about the bill, but on a cowbird the bill is quite heavy; not nearly so stout on the YH blackbird. Immature male yellow headed black birds are not so bright yellow as the adults, and there should definitely be some young of the year fledged by this time of the year.
If the picture is not accurate then we will need a better photo to do better than that. IMO This picture does not show a brown headed cowbird. Most cell phones will take a better picture and if it is tame enough please post another or even better a couple more. The more different poses the better.
Yellow headed blackbirds are almost invariably connected to swampy areas, especially those with cattail fringes. They also tend to be around in groups, especially groups nesting in the same swamp not mixed in with red winged black birds. The females of both species are quite drab, and quite distinct from those of the cowbirds.
This furnace has 2 pipes. The larger pipe about 4" is the air intake is supported through ring #29. The smaller pipe inside the larger pipe about 2" is the furnace exhaust connected through the larger ring #30 and screwed to the raised portion of ring #29. My furnace a vintage Hydro Flame Convection with dual direct vent, needed no power, and used a pilot light. Had the identical 2 pipe direct vent as yours. I built 2 rings similar to your drawing. Had 2 major issues:
1. Anytime the wind exceeded 20 mph, my pilot light would blow out even when the furnace side of my house was parked to the leeward side due to wind eddies.
2. At the exhaust cap which was about 1 3/4" from the side of the house would scorch the side surface above the cap and the moisture from burning Propane (1/2 pt. per 10#) would freeze on and below the exhaust when temp went -10 or below.
Second year I re-designed using the Pipe Cap photo 1 from Menards for under $10. I cut off the bottom half at the black line and cut a hole on the outside flat surface for the exhaust pipe. This was my fresh air intake. Also filled the inside of the cap with a disassembled expanded metal filter from a motor home stove top exhaust filter.
Secured it to my house and ran the exhaust pipe through the hole in the end. Attached the exhaust pipe to a 2" x 3" aluminum gutter down spout used as a chimney. Photos 2 and 3. Totally solved my issues. You may also find a similar cap to photo 1 for the exhaust instead of the pipe. Most of the caps I was able to find had a 4" connection point so you would need to modify to 2" or whatever size you exhaust pipe is. How ever you do it, cover all openings with a screen to keep the Mud-daubers out as they love burned propane orifice area to build there nest.
Photo 2 & 3
Going to bait tomorrow with fryer grease, bread, dog food, cherry frosting, peanut butter, soft candies, raw white sugar, and popcorn. I am throwing everything at them tomorrow, hopefully the bears like the variety!