Guests - If You want access to member only forums on HSO. You will gain access only when you Sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Diezel350

we are 'the leading edge' I Share on HSO
  • Content count

    50
  • Joined

  • Last visited

    Never

About Diezel350

  • Rank
    HotSpotOutdoors.com Family

Profile Information

  • Location:
    MN
  1. 97 polaris 440xc shock line

    If it is the crimp that wore through you will need a new hose (about $50). If it was the 90 degree fitting after the crimp about $5
  2. 97 polaris 440xc shock line

    Dew, where did it rub through? I rebuild shocks and can get parts for those for alot less than the dealer. I think I am pretty close to you, Monticello Right?
  3. Older Johnson motor prob.

    That screen is the water pick-up on that motor. Might want to pull the lower unit and look at the seal under the water pump housing.
  4. missing trophy. need help

    Rob Douglas..... Hmmmm.... Wasn't that the name of one of the boys on the TV show "My Three Sons" Does he have a brother named Chip? Maybe that is why it sounds familiar.
  5. Packerfish, Pictures are sent. J rookie K, I will try to get ahold of you later today.
  6. gas smell

    Wavey If your carbs have a air box over them take it off and get a better look at the carbs to be sure the leak is not from one of the carb gaskets. It is possible that a bad float in one of the carbs is not letting the needle seat properly also. I would suggest a manual if not familiar with the inards of a carb.
  7. gas smell

    I would check all the connections and hoses first to make sure they are not the culprit. If you find no leaks there go to the carb. Sounds like the needle and seat are not doing their job inside the carb. When the motor is not running the gas will slowly leak by and spill out of the throat of the carb. As the gas spills out the carb and flows down the motor it picks up all the grease along the way and causes the black streaks you are seeing It sounds like a good carb cleaning may be in order too for the rough low rpm running. Needle and seat replacement is pretty easy once the carb is off.
  8. 1973 14.5’ Starcraft Aluminum boat, single console This boat was completely refurbished in 2002, including floor replacement and rebuilt and reconfigured interior. Carpeted, storage areas, casting platform, swivel seats / bases, butt seat etc…. 1962 classic Johnson Super Seahorse 40 hp remote (40hp is max for this boat) Great running solid motor with good compression, It may be old but it doesn’t know that. •Two 6 gallon metal OMC gas tanks New water impeller installed •Spare prop, •Spare shear pins 1977 Spartan trailer with tilt •Lifetime license •new lights, •rolling tongue jack, •new winch, •spare tire. •Fresh bearings and bearing buddies •New leaf springs Additional items included •12V Transom mount electric trolling motor (30lb thrust I believe) •Two batteries (trolling/starting and accessories) •Two Anchors •Extra seat and base, matches the others •Two Stearns brand life vests I will include any extras for the boat that I did not mention here. Asking $1300 / obo for everything. I will not separate boat, motor or trailer. Sold as a complete package only. Pictures available, Diezel350 at hotmail dot com Forgot to add it earlier but motor has an aftermarket trim / tilt also [This message has been edited by Diezel350 (edited 08-18-2004).] [This message has been edited by Diezel350 (edited 08-25-2004).] [This message has been edited by Diezel350 (edited 09-02-2004).]